Book a visit

Feel it click.

Locks and safes for Chicago homes and shops, fitted and serviced by licensed locksmiths.

Book a visit
Try the dial: left twice to 24, right to 61, left to 8, then right.
  1. Not set: 24
  2. Not set: 61
  3. Not set: 08
Free walkthrough with the vault code 24-61-08. Give it when you book.

How a lock keeps its word

  1. A lock is five small decisions.

    Five brass pins, five springs and one plug in a housing. Take a good look: this is what you are trusting.

  2. Everything seats.

    The pins drop into the plug, the drivers above them, the springs on top. Nothing is glued. It is all held by fit.

  3. The key does one job.

    Its cuts lift each pin to a different height, one cut for each pin. A key that is off by a hair lifts one of them wrong.

  4. Line them up on the shear line.

    Every gap between a key pin and its driver has to land on the same line. Then, and only then, the plug can turn.

  5. Then it turns.

    The key pins go with the plug, the drivers stay behind, the bolt draws back. That is the whole trick. We make sure it stays a trick only your key can do.

Try to pick it.

Two locks on the bench. Hold tension, lift the pins, feel for the set. The first one gives in seconds. The second is the one we fit.

Hold Space or press Tension. Then drag a pin up until it clicks. Only one pin fights you at a time.

From the hardware store

Five plain pins.

Tension first, then lift a pin.

What Detent fits

Two spools and a serrated pin.

Tension first, then lift a pin.

What are you protecting?

Safes are sold by rating, not by size. Say what goes in and how long it should hold, and the finder writes the line to ask a dealer for.

What goes in it?
If there were a fire, how long should it survive?
If someone came for it, how long should it hold?

Ask a dealer for

Fire
UL 72 Class 350, 1 hour
Theft
UL 1037 RSC

Class 350 means the inside stays under 350°F (177°C), cool enough for paper, while the outside sits in a 1,700°F (927°C) furnace for an hour.

RSC is the residential test: one technician gets five minutes with common hand tools, such as hammers, chisels and pry bars.

A rating says how long a safe resists a tool attack, not that it cannot be opened. Ask any dealer for the UL file number of the model. We bolt it down, because a safe you can carry takes its rating with it.

The price comes first.

Nothing is touched until you have read it and signed it. That is the whole promise, and it is on paper.

  1. We look.

    A licensed locksmith walks your doors and measures what is there. The walkthrough is free with the vault code from the dial.

  2. You read it.

    The quote comes in writing the same day: every part, every hour, one total, good for 14 days.

  3. We work.

    Only after you sign. If the price would move, we stop and ask before we go on.

Book a visit

Quote Q-0412Good for 14 days

For
Logan Square, a 1920s greystone
Walkthrough
Tuesday, 9:30, free with the vault code
Line items
Work and partsQtyEachTotal
Rekey cylinders to one key6$22$132
Grade 1 deadbolts, front and back doors2$58$116
High-security cylinder, front door, 3 keys1$96$96
Reinforced strike plates, 3 inch screws2$12$24
Total$368

Signed to start. Nothing is begun before this line.

Questions.

Eight that people ask before they book. If yours is not here, call (312) 555-0142 and ask.

Do I have to be home?

Someone should be there for the walkthrough, and to sign the quote. After that we can work while you are out if you leave us a way in. We text you when the last lock is tested.

What does the walkthrough cost?

Nothing with the vault code from the dial on the home page. Without the code it is $49, and that is credited to the job if you go ahead.

Is rekeying different from changing the lock?

Yes. Rekeying swaps the pins inside the lock you already have, so the old keys stop working and the hardware stays. Replacing changes the whole lock. Rekeying costs less and is usually enough, unless the lock is worn or your insurer asks for a certain grade.

Can you copy a key for a high-security lock?

Not without the owner’s card. A restricted keyway exists so that a copy needs the card and the owner’s ID. If the card is lost, we can rebuild it once we have checked the lock is yours.

Are you licensed?

Yes. Locksmiths in Illinois are licensed by the state, and every Detent locksmith is licensed and bonded. Their names and numbers are printed on your written quote.

What if the safe code is lost?

We open it for the owner, with proof it is theirs. Most combination and keypad safes can be opened without drilling. If drilling is the only way, we say so before we start, with the price.

What happens after a break-in?

We make the door safe first, with a temporary hold if it needs one, then quote the proper repair. The written description can go to your insurer as it is.

Where do you work, and when?

Chicago and the ring around it, from the West Loop to Oak Park and Pilsen to Lincoln Park. Monday to Saturday, 8 to 6. Lockouts and emergencies, any hour, every day, on (312) 555-0173.

Book a visit